System devices control
It is now possible to control the status of system devices from scripts. For example, a script can change the operating mode of the oxygen from automatic to manual or off. Controlling is performed using the control tag:
<control command="feuchtigkeit.general.dehumidify off" start="12"/>
The command attribute specifies the action to be executed (in this case, the dehumidifier is switched off), whereas the start attribute specifies when the command is to be run. Available commands are:
| Command | Information |
|---|---|
| sauerstoff.general.high | Oxygen flow to HIGH |
| sauerstoff.general.medium | Oxygen flow to MEDIUM |
| sauerstoff.general.standard | Oxygen flow to STANDARD |
| sauerstoff.general.auto on | Automatic oxygen control |
| sauerstoff.general.flow on | Manual oxygen control on |
| sauerstoff.general.flow off | Manual oxygen control off |
| kohlendioxid.general.high | CO2 Scrubber level HIGH |
| kohlendioxid.general.medium | CO2 Scrubber level MEDIUM |
| kohlendioxid.general.standard | CO2 Scrubber level STANDARD |
| kohlendioxid.general.auto on | CO2 Scrubber automatic control |
| kohlendioxid.general.scrub on | CO2 Scrubber manual on |
| kohlendioxid.general.scrub off | CO2 Scrubber manual off |
| feuchtigkeit.general.high | Dehumidifier HIGH |
| feuchtigkeit.general.medium | Dehumidifier MEDIUM |
| feuchtigkeit.general.standard | Dehumidifier STANDARD |
| feuchtigkeit.general.auto on | Dehumidifier automatic control |
| feuchtigkeit.general.dehumidify on | Dehumidifier manual on |
| feuchtigkeit.general.dehumidify off | Dehumidifier manual off |
| stickstoff.general.auto on | Nitrogen automatic control |
| stickstoff.general.flow on | Nitrogen manual flow on |
| stickstoff.general.flow off | Nitrogen manual flow off |
| |
|
| |
|
| |
|
| stickstoff.vent.high | Nitrogen vent HIGH |
| stickstoff.vent.medium | Nitrogen vent MEDIUM |
| stickstoff.vent.standard | Nitrogen vent STANDARD |
| stickstoff.flow.high | Nitrogen flow HIGH |
| stickstoff.flow.medium | Nitrogen flow MEDIUM |
| stickstoff.flow.standard | Nitrogen flow STANDARD |
| temperature.general.auto on | Temperature automatic control on |
| temperature.general.heat on | Temperature heater on |
| temperature.general.off | Temperature manual off |
| temperature.general.cool on | Temperature cooler on |
| temperature.heater.high | Heater HIGH |
| temperature.heater.medium | Heater MEDIUM |
| temperature.heater.standard | Heater STANDARD |
| temperature.cooler.high | Cooler HIGH |
| temperature.cooler.medium | Cooler MEDIUM |
| temperature.cooler.standard | Cooler STANDARD |